Hisense TVs have a common problem: sometimes they won’t turn on and give a red light indication. The red link blinking indicates that there is something wrong with Hisense TV.
In most cases, the problem is related to hardware, and if the Hisense TV is not turning on and flashes red light, you need to check the motherboard and power supply of the TV.
In today’s guide, we have mentioned some quick ways to help you get out of this difficulty.
Why My Hisense TV Won’t Turn On And Red Light Flashes?
If you find a red light indication on Hisense TV, it means there is a problem with a power cord, motherboard, or power supply, or there might be a software issue.
If the issue is related to hardware, you must fix it immediately.
Below are some quick steps to deal with the Red light indicator on Hisense TV;
1- Check The Power Cord
The foremost thing that you must check is the power cord. Any fault in the cord results in lowering the amount of current. The Hisense TV won’t turn on if the current is not sufficient.
Also, check the cable; the uncovered or damaged cable can also lead Hisense TV to not turn on. If you think the outlet is damaged, then change the outlet or use a power surge protector.
2- Power Reset Hisense TV
Power reset is another simple way to fix the red light indications on Hisense TV. Power reset will clear all the remaining power from the TV.
Here is how to Power reset Hisense TV;
- Turn off the TV and unplug it.
- After a minute, press and hold the power button for 30 seconds.
- Now plug the Hisense TV back in.
We recommend doing this process at least three times to make it useful.
Related Post: Are Hisense TVs Reliable
3- Factory Reset Hisense TV
If the above two methods don’t work, you should Factory reset Hisense TV. You must wonder how I can reset the TV if it’s not turning on.
Well, there is a reset button on the side of Hisense TV. And you can easily reset Hisense TV to factory settings.
Factory reset will remove your TV’s settings, apps, and data. So if there was a software-related issue, it would be gone.
Here are steps to Factory reset Hisense TV;
- Plug the TV into the outlet.
- Now press and hold the reset button on the back side of Hisense TV. You need a pen or toothpick to press and hold the button.
- You need to press and hold the reset button until the TV turns off and turns back on
Release the button once the TV is turned back on. Hisense TV will now take some time to reboot and configure.
4- Check The Motherboard
The red light blinking on Hisense TV indicates the hardware issue, especially the motherboard. In such case, the back side of the tv smell like a burnt circuit.
You can open the back side of Hisense TV if you have DIY skills. There are a lot of screws, so I need extra time to remove the housing.
Once you have removed the housing, check the motherboard and the other circuits; if anything smells, it’s burned. Don’t try to replace the hardware yourself. Close the TV and take it to any nearby repair shop or call a smart TV repair expert at your home.
Contact Hisense For Warranty Claims
If none of the solutions work for you, it’s time to contact Hisense TV support. Typically Hisense smart TVs come with one year of warranty.
Before calming a warranty, ensure you’re fulfilling the terms and conditions. The team will ask you about the issue. They will immediately replace the TV if the problem falls under their one-year warranty.
The good news is Hisense also offers service plans on a yearly basis, and if you have one of them, you can easily repair or replace your unit. The price of the service plan depends on your TV model.
The yearly service plan gives a big advantage. You can repair the Hisense TV server times under a one-year service plan, and there are no hidden charges except one time yearly based payment.
Hisense TV Red Light Blinking Codes
Like any other electronic device, Hisense TV also has various blinking codes that indicate a certain problem. You can check the various Hisense TV blinking codes in the table below.
|Red light Blinking||Reasons|
|2 times||Issue with backlight|
|4 times||Fault in Main logic board or inverter board wires|
|6 times||Issue with Inverter board, or mother board|
|10 times||Issue with power board|
It’s one of the worst experiences when Hisense tv won’t turn on red light flashes. You become stuck and don’t know what to do.
Several reasons are causing this problem. In the above article, we have mentioned some methods to fix the issue.
The problem comes when the issue is related to hardware, like the fault in the motherboard, power supply, or any other circuit. In such scenarios, you can’t do anything yourself; you must contact Hisense support and ask them to replace the TV or take it to a TV repair shop.
But if the issue is related to the power cord or software, you can immediately fix it yourself. Most of the time, just a simple power reset can fix the issue, but if it doesn’t work, you should try to reset the TV to its factory settings.
Why the Hisense TV won’t turn on and blinks a red LED light six times?
If your Hisense TV won’t turn on and blinks red light six times, it means there is a problem with the motherboard or power board.
How to fix Hisense TV if it won’t turn on?
If your Hisense TV doesn’t turn on, you should power reset it. Unplug the TV, and wait for 60 seconds. Now plug the Hisense TV back in, and you’re ready.
Hi! I’m Aiden Elliot. I’m a tech nerd and have worked in the tech industry for the last 7 years. Now I have founded JustSmartHues to help you fix tech issues. I hope you will find this blog helpful.